HiVis FR PPE2 D/N Rain Jacket

HiVis FR PPE2 D/N Rain
Jacket

Fabric: 280gsm “3 layer bonded into 1”
waterproof and breathable fabric, 99% polyester
& 1% Anti-static carbon outer laminated to 50%

Modacrylic & 50% cotton inner (soft &
comfortable against skin), fully seam sealed, HRC2
– ATPV: 8+cal/cm2. 2-way radio loops on front
shoulders, Storm flap at centre front with SBS 8#

Vislon 2-way heavy duty zipper/plastic slider;
Detachable zip off hood with SBS 5# Vislon zipper,
elastic cuffs with adjustable sleeve tab & touch
tape closure.

Twin waist pockets with flap and
touch tape closure. Hoop Pattern Bio-Motion
“ANS UL-209 FR” Segmented FR Reflective Tape
(50 washes) on Body & sleeves. 2 Tone front only.

FEATURES:

SUN Protection UPF 40+ – 50+
DNC garments are tested for UPF (ultraviolet protection factor) in accordance with AS/NZS4399:2017. The level of protection varies depending on
the fabric and colour of the garment. 15+, 30+/35+, 40+/50+

Inherent FR
Flame Resistance (FR) is naturally occurring in properties of the fibre and won’t wash or wear out and are NOT Fireproof. It’ll only provide
protection against clothing ignition and to self-extinguish almost immediately upon removal of the ignition source.

PPE2 ATPV: 8+ Cal/cm²
NFPA 70E / ASTM F1959 – Electrical Safety in the Workplace – Personal Protective Equipment (PPE) Category 2, PPE2(HRC2) min ATPV 8
Cal/cm2.

NENS09:2014
Selected by Energy Networks Australia, use and maintenance of Personal Protective Equipment (PPE) used to protect people against electrical arc
hazards within the Electricity Supply Industry. The recommended minimum ATPV for base garments is PPE (HRC 1) — 4cal/cm2, and all
opening/buttons/press studs/zippers are been covered by FR fabric.

ISO 14116:2015 (FR)
Specifies the performance requirements for the limited flame spread properties of all material assemblies and protective clothing to reduce the
possibility of the clothing burning when in occasional and brief contact with small flames and constituting a hazard.

ISO 11612:2015 (FR)
This clothing is intended to protect the wearer against small splashes of molten metal, short contact with flames, radiant heat from electric arcs,
protection for welding and allied processes. It can minimize the possibility of electrical shock by short-term, contact with live electrical conductors
up to approximately 100 VDC (Sweat, soiling or other contaminants can affect protection levels).

EN 1149-5:2008 (Anti-static)
The latest technology is used in the production of DNC Carbon grid Anti—static 98% Polyester/PU, 2% Carbon, breathable waterproof fabric rain
jacket, vest & pants, comply with EN ISO 14116:2008 for FR & BS EN1149-5:2008 for Anti-static.

HiVis D/N Fabric & Design New AS/NZS 4602.1:2011

DNC HiVis garments are standard Class F AS/NZS1906,4:2010, Class D/N, AS/NZS 4602112011 to meet the requirements of Hi-Vis Safety
standards HiVis Fabric & Design of garments, for day and night use.

Environmentally Friendly Green Dye
All DNC garment fabric fully complies with Oeko-Tex standard 100 class II for products with direct contact to the skin. It does not contain harmful,
non-aromatic amine and does not produce pollution of the environment harmful chemical.

Waterproof & Breathable
DNC HiVis Rainwear utilises the latest fabric technology. Not only are they waterproof, but also fully breathable